Fire Hoses in Australia

Fires can break out at any time in residential and commercial establishments. To prevent irreparable harm and damage to properties and life, action must be taken in a swift and timely manner. However, larger fires that are blazing out of control may be too much for fire extinguishers. Similarly, garden hoses are simply not sufficient to contain fires — and can even make matters worse.

With this in mind, fire hose reels are the best way to tackle unexpected and raging fires. In fact, properly designed fire hoses can put out flames from safe distances utilising pressurised water. This helps minimise damages to homes and businesses, while protecting the lives of loved ones and pets as well. In Australia, there are certain guidelines and installation requirements when it comes to fire hoses. These rules are designed to ensure maximum functionality and performance in any and all emergencies. Check this location on South Queensland.

fire hoses

Fire Hose Requirements

Some of the rules that govern fire hose requirements in Australia include:

• Property owners must confirm the water supply pressure correlates with the fire hose. This can be done by speaking to local utility companies and making adjustments as needed. Per Australian rules and guidelines, water discharge must be at 0.45 litres per second when attached to the inlet — the pressure will be around 220 kPa.
• Fire hose reels must be clearly visible with markings, signs and labels. Installation should be in areas that are readily accessible in the event a fire or other disaster occurs.
• All fire house assemblies and installations must be in compliance with Australian Standard AS1221 — regulatory standards for all residential, commercial and industrial fire hoses.
• All fire hose reel mounts must be a minimum of 1.5m above ground level for the spindle. However, it should not exceed 2.4m above ground level. Check this site for great details
• The stop valve operating instructions must be visible and available within 2m of the hose reel assembly. All operating instructions should be strictly adhered to as part of fire hose reel installation requirements.
• Remove any obstacles or hurdles in and around the hose reel assembly and valve hand-wheel. A 2m clearance area should be secured around the spindle, and at least 100mm from the hand-wheel unit.
• The fire reel hose should be flexible and able to run in any direction for maximum coverage. Installation locations must be right in order to effectively tackle and put out all fires in a timely and safe manner.
• If the fire hose reel is mounted on a structure — it must be able to support the pressure of the assembly. Similarly, it must be able to allow pulling of the hose without any interference or tangles. Fastener types utilized for installation on structures depend on the structures themselves. For example: brick or masonry will need special fasteners, while timber posts may require standard units. It is best to check the Australian Standard AS2441 for further clarification and details.

Fire Hoses can Save Lives

Australian fire hose reels can truly save lives and protect properties from fire damages. In fact, these units are designed to contain fires so that they do not spread to neighboring areas or homes. For more information on finding the right hose reel to meet guidelines and rules, simply check with local authorities to ensure maximum compliance across the board.