Fire sprinkler systems are actually the very first type of defense in protecting your business. Amazingly, the methods have the ability to control more than 90% of fire. That is enough reason to put in a sprinkler system in your business premises.
The initial step in doing so is always to determine the various kinds of sprinkler systems. You may be thinking that there’s just one kind of firefighting system for your business that operates in all areas and all situations, but that is not the case. Temperature, interior heating, and chemical presence systems are a number of the elements which impact the choice of yours.
Benefits of Fire Sprinkler Systems
Fire sprinkler systems have many benefits. The major advantage of installing a fire sprinkler system is the increased safety and protection they provide for the people in a building. The system will detect heat and activate the sprinklers instantly, typically before humans would be able to respond to it.
This is particularly true if a fire breaks out exactly where no one is actually present. With this situation, the device is able to suppress or perhaps extinguish the fire just before it causes way too much damage.
A fire sprinkler system also makes it possible for the people in the building to evacuate on time. By stopping the fire from spreading, the sprinklers provide people some time to get out easily.
The sprinklers can also lower the seriousness of a fire, assist firefighters to set it out faster and make their work safer.
Sprinkler systems can also be inconspicuous. They’re made to be hidden out so they don’t impact the appearance of the building, which could be an essential thing to consider for businesses.
Kinds of Sprinkler Systems
This is the most common type of sprinkler system, which is also used in office buildings, retail establishments, and climate controlled warehouses. The name speaks for itself; the wet system constantly has water running in the sprinkler piping. Most of the workplaces use this because of its fast reaction time.
It works through enabling a heat-detecting glass bulb on the sprinkler head to break instantly once fire is detected. Though efficient, these systems are only recommended in areas with a steady temperature above freezing level to prevent water from solidifying. As a result of disregarding caution, some buildings have resulted to leaking pipes due to the freezing and expanding of water.
Opposite the wet system is the dry pipe system for unheated buildings with freezing environment. The dry pipe system works by holding in pressurised air throughout the system. When fire breaks out, the heat-detecting glass bulb bursts and releases all pressurised air before the water passes through. It is best to install these fire sprinklers in concealed spaces to prevent outdoor temperatures from controlling the water temperature stored.
These are a combination of wet, dry and deluge systems. Used for places with valuable and highly protected materials, this system works especially for preventing accidental activation.
In this case, a double interlock system is integrated for a simultaneous activation of the fire detector by opening the pre-action valve, allowing the water to flow into the piping system. Activating the sprinkler will disperse water all throughout the sprinkler systems just as the deluge system works. Both detector and sprinkler work simultaneously for the activation of the protected area. In its dormancy, the piping system is filled with air similar to the dry system.
Hazardous places usually have this type of system. Using open sprinkler heads, all the sprinklers in the system discharges water immediately flooding the flaming hazard. The deluge system is necessary for areas where potential flammable chemicals and substances can cause rapid spread of fire. A lot of these substances are usually gas and oil around labs or kitchens. The system does not have a temperature-sensitive glass bulb to release water as it functions as a rapid response system.
Along with the installation, it is mandatory to have sprinkler testing.
How does it work?
The process involves the necessary system receptors that trigger the flame suppressor to flow. In accordance with Australian Standard 2118.1, pressure testing all pipework is done to the greater of 1400 kPa or 400 kPa about the maximum static working pressure for two hours. Before pipework is concealed, a test should be performed with all the piping reports recorded in the operating and maintenance manuals.
Fire Sprinklers and Building Codes
Fire sprinkler systems have been in use for more than 100 years. This is no doubt a result of codes and fire safety regulations, requiring the use of these systems in public buildings. Codes and regulations that require the installation of fire sprinkler systems were first put into place in the 1960s [source: Fleming].
Before then, builders mainly installed sprinklers to reduce property loss and insurance costs. Today, building requirements in many countries require the installation of fire sprinkler systems.
Protect Your Business with a Fire Sprinkler System
A fire sprinkler system is able to make it possible to maintain your company premises – less dangerous in the occasion of a fire break out. While doing effective fire safety to minimize the danger of fires is always the first line of defense, a fire sprinkler can help prevent a fire turning right into a catastrophe.
Consequently, think about your options, begin checking out the various kinds of systems, as well as work out the expenses. After that locate a specialized sprinkler system provider as well as get your system installed to lessen the chances of fire.
Fire sprinkler systems are actually fitted in buildings for life safety as well as property protection. Building owners set up and keep the devices with the hope that they are going to work to manage or extinguish fires if needed. To help ensure this is the case, remember to look for the assistance of a fire protection specialists or contact FCF Fire & Electrical Dubbo.