Light Installation Rockhampton

Our Light Installation Services

Whether you are a Rockhampton home or business, we have the light installation solution for you. Our team can install all types of lights to ensure a quality, professional finish every time. Check out some of the examples of LED Downlights, Pendant Lights and other types of light installation we can perform for you.

Benefits of LED Downlights

Led lights have become popular in Australian homes over the last few years. There are many benefits to LED lights as opposed to incandescent light bulbs. Below we compare the two types of lights:

Problems with Incandescent Lights

Incandescent light bulbs of various kinds have a long history, but that is not to say that they have ever been especially well suited to the job. Only a small fraction of the energy that is put into an incandescent bulb is ever actually turned into light, with 90% or more instead being converted into wasted, unwanted heat.

In addition to problems of this basic kind, incandescent bulbs also tend to be relatively fragile. With a thin, weak filament passing current in order to produce the desired light, wear starts occurring from the moment such a bulb is first turned on.

Even the best-built bulbs of this kind might last only a couple of thousand hours in actual use, with the price of replacements further inflating the associated costs of ownership. When replacing a bulb is especially inconvenient, as with many downlight applications, the tab will rise still further, making it especially worthwhile to seek out other options, instead. Check this site

Why LED Lights Are A Better Choice

Bulbs based on light-emitting diodes, or LEDs, on the other hand, are much better suited to the important work that is asked of them. Unlike incandescent bulbs of various kinds, LED elements do not produce light as a mere byproduct while mostly turning energy into heat. Instead, LEDs are engineered in very precise ways to maximize the conversion of electric current into visible light, and they do a very efficient job of it. In fact, a high quality LED bulb will often boast efficiency ratings of 70% or more, meaning that they can consume as little as one-seventh the electricity an incandescent bulb might for the same level of output.

LED Lights also tend to be far more durable than incandescent ones, whether in terms of their ability to withstand shocks or with how they hold up in everyday usage. Some LED Downlights will put in as much as 80,000 hours of service without failing, cutting down both on the money spent on replacements and the effort and expense associated with doing the corresponding work. Downlight Installation specialists today therefore very often recommend LED bulbs over incandescent options of all kinds, both for saving money and for other reasons entirely.

4 Mistakes to Avoid During Residential Light Installation

Interior designers often give advice on home lighting. In trying to tackle such dilemmas, some designers recommend fixtures that waste energy and do not put light where it is needed the most. These mistakes are often repeated, as most homeowners do not know much about Light Installation. Below are several lighting errors to avoid, as well as some tips on doing the job right.

Going Overboard With Recessed Downlighting

This mistake is commonly encountered by lighting designers. Can lights are very inexpensive for builders to install, and people sometimes assume that laying these lights out in a grid pattern will light the entire space. However, the optics of these lights only allow about half of the lamp’s lumen output to escape. Additionally, unless these fixtures are adjustable, they do not put enough light on a room’s vertical surfaces. Rather than plastering the room with can lights, layer them overhead and install task lighting under cabinetry.

Omitting Task Lighting From the Kitchen

Overhead lights have their uses, but there are better ways of Installing Lights for countertops, such as xenon, LED or fluorescent task lighting installed under upper cabinets. If the kitchen lacks these design elements over some of its work surfaces, a ceiling- or wall-mouted recessed adjustable fixture can make a significant difference. However, the homeowner should take care to choose the temperature of LED or fluorescent lighting wisely.

Using Halogen or Incandescent Lighting Without a Dimmer

While many are finding ways to retrofit lighting fixtures with longer-lasting, efficient sources, incandescent bulbs are still an important, viable part of residential lighting as long as they are dimmable. When these lights are dimmed, the heat and energy output is diminished, and the lights last longer.

light installation

Not Incorporating Different Lighting Types

Today’s lighting designers understand that a well-designed space uses different kinds of light. Ambient light is useful for identifying objects and moving about the room. Task lighting provides concentrated light for jobs such as reading and cooking, while accent lighting is used to accentuate architectural features and artwork. Combining these three lighting types gives greater interest and functionality while increasing the chances that there will be sufficient light in the room.